Home arrow Engine arrow Rotax Max 125cc Jetting
Rotax Max 125cc Jetting PDF  | Print |  E-mail
Written by Vic R   

CLick on the following diagram for a high resolution version.  

RotaxMaxJetting

 

 

INFORMATION

Decrease Jet Size by one size (e.g. 170 - 168) for every increase in elevation of 400m.

Circlip position has a slight impact on Jet size.  e.g. Position #4 is slightly leaner than Position #1

Humidity has a small effect. E.g. Change of humidity from 0% to 100% requires a 0.7 smaller jet size

The Jet # actually is the inside diameter of the Jet divided by 100 (mm).

Other things that may have an impact on jetting -

  • needle size (e.g. k27 or k98)
  • venturi size (e.g. 8.5 or 12.5)
  • Idle Jet (30 or 60)
  • Idle Jet Emeulsion Tube (30 or 60)
  • Float size (e.g. 5.2grams or 3.6grams)
  • Is carby blueprinte?


 The two most common combinations of venturi, floats and idle jets are:

  • 12.5 venturi with 5.2 gr floats and 30/30 jets  (older Rotaxs)
  • 8.5 venturi with 3.6 gr floats and 60/60 jets
Sponsors
Banner