Home arrow Engine arrow IAME X30 Setup
IAME X30 Setup PDF  | Print |  E-mail
Written by Vic R   

Engine Setup

  • Pipe Length = 435 -440 mm for high speed tracks, 455mm for short (from flange to first weld)
  • Set pop off on carby to 9.5 to 10 (9.5 for hot days)
  • Lever height  0mm to half the height of the arm.
  • Setup gearing to achieve 15,000 RPM
  • Mixture 25 to 1 (Castor/Synthetic such as Shell M100)
  • Spark Plug - Sydney 8 (winter)  9.5 (summer)

Maintenance

  • If racing - new ring every 5 hours, new piston every 10 hours


Tuning

  • Mixture - Low at 1 hour  5 minutes out,  High at 1 hour  5 minutes out
Sponsors
Banner